The TS5620 series
general purpose diaphragm valves are ideal for making controlled
deposits of most low to medium viscosity liquids. The wetted parts
are made from PTFE for low maintenance handling of reactive
adhesives such as Cyanoacrylates.
The
TS5620 series dispense valves accurately control the application of
most low to medium viscosity fluids without drips. The unique
seal-less design incorporates an inert polymer diaphragm that
isolates the actuator from the valve.
The adjustable
open/close stroke 0.13mm to 0.64mm (0.005 Inch to 0.025 Inch) allows for a
very fast response with positive shutoff. Wetted components are made
of inert plastics.
Takes a direct feed from any
pressure pot,
cartridge or syringe and includes a selection of flexible fluid line
tubing and connectors.
Valve open time can be as short as 15
milliseconds. Model TS5620HT with Teflon wetted parts is
used for dispensing solvents, cyanoacrylates, anaerobics and fluxes.
Simple to use withTS500R,
TS250,
TS350
digital timed controllers.
Adhesive Dispensing Ltd provide a wide range
of equipment options for dispensing almost all assembly fluids -
from watery liquids, solvents, primers and activators through to
thick pastes, sealants, silicones, gels and epoxies.
TS5620HT UHMW Horizontal Air Valve
GBP each ex. Vat. Excludes
Carriage.
Lead Time: Usually Ships 72
Hours
Summary: Diaphragm valve
with horizontal design. Adhesive or liquid is fed under pressure
to the top of the fluid housing, the diaphragm opens to allow
flow to the tip from the bottom. Adjustable stroke control for
fine tuning. Teflon head and diaphragm. Make rapid dots or
controlled beads. For Cyanoacrylates, primers, solvents, inks,
oils, anaerobics. Comes with airline hose and fittings kit. Use
with any pressure pot or cartridge system.
Item
Qty
Price
GBP
Add
TS5620HT
1
each
TS5620HT Specifications
Wetted Parts: Teflon Fluid
Housing Head Colour: White Size:
61mm L x 24mm Diameter Valve Weight: 59 Gram Fluid Viscosity Range: 1 to
50,000
CPS Repeatability: +/- 0.30% Cycle Rate: Up to 500 cycles/ minute
Flow Rate: 3432ml/Min (water) @ 100 psi Minimum Shot Size: 0.0075cc/ ml
Maximum Fluid Pressure: 100 psi Activation Air Pressure: Minimum 70psi Material Inlet
Thread Size: 1/4-28 UNF Material Outlet Thread Size:
1/4-28 UNF Mounting Hole
Thread Size: 10-32" UNF
Body Material: Aluminium
Valve Body Colour: Black Fluid Flow Path: Straight Warranty: 1 Year
More Info
Part
Code
Description
Specs
Lead Time
Pack
Price GBP
Add
Spares and Accessories.
Replacement wetted parts below are available
to ensure the diaphragm valve operates as
new. Easy to replace and provides reliable
and consistent performance.
5620UHMW-DKIT Replacement Diaphragm Disc Kit
White colour with spares kit
UHMW
24 Hours
1
each
5620TFE-DKIT Replacement Diaphragm Disc Kit
Grey colour with spares kit
PTFE Teflon
24 Hours
1
each
5620-000-011 Replacement Diaphragm Disc Only
Grey colour disc part only
PTFE Teflon
24 Hours
1
each
5620HT-FHKIT Replacement Fluid Housing Kit
White colour with spares kit
PTFE
24 Hours
1
each
More Info
Part
Code
Description
Specs
Lead Time
Pack
Price GBP
Add
Fluid Fittings and
Fluid Lines. Used on valves and
pressure pots, these components provide a
leak free link using the convenient luer
lock design attachment. Quick disconnect
parts.
Precision Dispensing Tips.
Used on valves and pressure pots, these
components provide a leak free link using
the convenient luer lock attachment. Tips to
handle UV adhesives and most
other liquids.
DCK600 Assorted Luer Lock Tip Kit in Box
145 Assorted
TE, TTN, PP, TLC
24 Hours
1
each
TS18-1/2MPK Aluminium Crimped Tip Silver Hub
0.84mm ID, 12.7mm Length
Aluminium
24 Hours
50
pack
3118PPS-B Flexible Polypro Tip Green Hub
0.84mm ID, 12.7mm Length
Polypro
24 Hours
50
pack
More Info
Part
Code
Description
Specs
Lead Time
Pack
Price GBP
Add
Dispense Valve setup.
Air operated valves work with our range of
digital controller units including the TS250
below. Fluid can be fed
to the valve from our range of pressure
pots such as the 1/2 Litre and 2 Litre below.
Delivery: Products
shipped by courier on a tracked and
insured service for stock items. Products on a
longer
lead time or built to order will be sent as soon as available. Customers are informed of
ship dates.
Typical Applications:-
Deposits of UV cure glues, Cyanoacrylate adhesives, solvents, primers,
inks, oils, flowable liquids, threadlock adhesives & many others.
Copyright
2018 Adhesive Dispensing Ltd. All transactions subject to Adhesive
Dispensing Ltd standard
Terms & Conditions, E&OE.
Prices are
in UK pounds. Vat is not charged on orders placed outside the EU
and any EU orders are exempt from VAT only if a valid company VAT number is
provided to us at time of order or before shipping. Products are covered by a 12-month warranty against
faults and malfunction.
All orders online are
encrypted for safety and security. Please read our
privacy agreement for details. We also
process phone or fax payments by credit and debit card. Please contact
our accounts department if you would like to open a credit account with
us.
Disclaimer: While reasonable efforts have
been made to ensure all information on this website is accurate,
Adhesive Dispensing Ltd. do not assume responsibility for any errors
or omissions. All specifications, illustrations, data and prices are
subject to change without notice.
