Adhesive Dispensing
Home   |  Privacy   |   Terms   |  Accounts  |   Contact Us  |   About Us
 Product Search     
 

You currently have items in your basket. (Total=)

> Home > Equipment > Metering Valves > Pinch Tube Valves
 
           
     
 
Pinch Tube Adhesive Dispensing Valves
 
Our precision pinch tube valves for the controlled dispensing of most fluids and adhesives. Fluid is fed under pressure to the polyethylene tube inside the valve. This is pinched closed and opens up when dispensing. The tube is designed to last long periods and replacements are supplied in packs of ten. The benefit of these valves is that there is no potential of curable adhesives damaging the valve as the tube is just changed. Ideal for reactive adhesives and two part epoxies.
 
TS1212 Pinch Tube Valve Adhesive Dispensing
  
Pinch valves are used for dispensing most low to medium viscosity fluids. Using disposable pinch tubes eliminates the need for maintenance and cleaning.

Low cost, quick to setup and easy to use. Whether dispensing by hand control or on a production line, pinch valves will handle cyanoacrylates, UV cure, anaerobics, inks, paints, solvents, primers and activators. As these valves use plastic replacement pinch tubes, they are maintenance free and can handle fluids that can cure or set.

Use our valve selection guide page or click here for PDF datasheet selection guide. Precision valves will dispense accurate deposits direct from syringes, cartridges or pressure pots. Valves operate with minimal maintenance, ensuring clean and accurate dispensing whether used by hand, fixed on a production line or mounted onto an XYZ robot.

Use our valve selection guide page. Precision valves will dispense accurate deposits direct from syringes, cartridges or pressure pots. Valves operate with minimal maintenance, ensuring clean and accurate dispensing & can be fixed on a production line or onto an XYZ robot.

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
 
TS1201 Hand Lever Valve TS1201 Hand Lever Pinch Tube Valve Techcon
GBP   each ex. Vat.
Excludes Carriage.
Lead Time: Usually Ships 24 Hours
 
Summary: The TS1201 is a hand held pen valve using pinch tubes. This valve takes a direct feed of fluid from a pressure pot or cartridge reservoir. A simple non-timed valve for a good level of control over low to medium viscosity liquids such as Cyanoacrylate, UV cure, primers. Low cost hand operated solution. Read more...  
 
Item Qty Price GBP Add
TS1201 1   each
 
TS1201 Specifications
 
Wetted Parts: Polyethylene
Size: 127mm L x 34mm Diameter
Hand Lever Valve Weight: 36 Gram
Fluid Viscosity Range: 1 to 45,000 CPS
Flow Rate: 0.54 GAL/Min (water) @ 60 psi
Material Inlet Connection: Female Luer Lock
Material Outlet Connection: Male Luer Lock
Body Material: High Density Nylon
Valve Body Colour: Black
Warranty: 1 Year
 
TS1212 Air Operated Valve TS1212 Pinch Tube Valve Techcon
GBP   each ex. Vat.
Excludes Carriage.
Lead Time: Ships 24 Hours
 
Summary: TS1212 is an air operated compact pinch tube valve for repeat dots or controlled lines of most low to medium viscosity adhesives including cyanoacrylates, UV cure, epoxies and solvents. Easy to replace low cost pinch tubes. Use with a digital valve controller and a pressure pot. Read more...  
 
Item Qty Price GBP Add
TS941A 1   each
 
TS1212 Specifications
 
Wetted Parts: Polyethylene
Size: 83mm L x 40mm Diameter
Valve Weight: 82 Gram
Fluid Viscosity Range: 1 to 45,000 CPS
Flow Rate: 0.54 GAL/ Min (water) @ 60 psi
Repeatability: +/- 0.56%
Material Inlet Connection: Female Luer Lock
Material Outlet Connection: Male Luer Lock
Cycle Rate: Up to 500 cycles/ minute
Minimum Shot Size: 0.007cc/ ml
Maximum Fluid Pressure: 60 psi
Activation Air Pressure: Minimum 50 psi
Warranty: 1 Year
 
TS250 Digital Valve Controller
GBP   each ex. Vat.
Excludes Carriage.
Lead Time: Ships 24 Hours
 
Summary: This air-powered dispenser has 0-100 PSI air output for controlling TS1212 valve. It is dual voltage so can be used globally. We ship this with accessories ready to use out of the box. Learn more...  
 
Item Qty Price GBP Add
TS250 1   each
 
TS250 Specifications
 
Type: Electro Pneumatic Timed Dispenser
Initiate: Electric Foot Switch or I/O Port
Air Pressure Display: Analogue Gauge
Timer Display: Digital LCD
Timer: 0.02 to 60 seconds
Dispense Modes: Timed or Continuous
Output Air Pressure: Up to 100 psi
Input Air Pressure: 152 x 165 x 178 mm
Weight: 1.2kg (2.6lb)
Input Voltage: 110V - 220V AC
Cycle Rate: Up to 600 cycles/ minute
Timer Tolerances: +/- 0.001%
Meets or Exceeds: CE, TUV-GS, NRTL
Warranty: 1 Year
 
Pressure Pot 2 Litre TS2220 Pressure Pot 2 Litre Adhesive Dispensing
GBP   each ex. Vat.
Excludes carriage.
Lead Time: Ships 24 Hours
 
Summary: Premium tank unit with lid, adjustable air pressure gauge, stainless steel tube fitting, 1/4" OD flexible tube kit, user guide. CE approved. Use with TS1201 and TS1212 valves. Learn more...
 
Product Code Qty Price GBP Add
TS2220 1   each
 
TS2220 Specifications
 
Wetted Parts: Polyethylene
Outer Size: 128mm W x 185mm H
Inner Chamber Size: 120mm W x 177mm H
Fluid Viscosity Range: Use up to 30,000 CPS
Weight: 4.5kg
Maximum Air Pressure: 75 psi
Air Inlet Connection: 1/4" NPT Thread
Material Outlet Connection: 1/4" OD Tubing
Materials: Stainless Steel/ Aluminium
Meets or Excees: CE
Warranty: 1 Year
 
     
More Info Part Code

Specs

 Colour Lead Time

Pack

 Price GBP Add
TS1212 Pinch Tubes in clear (natural) and black (opaque) colours. Natural for most materials and black for UV cure adhesives. Polyethylene or Polyurethane tubes. Luer lock attachment. Maximum pressure 60 psi. Use with TS1212 air operated valve only. All prices are for sealed packs of (10).
Pinch tubes adhesive dispensing 1212-004-002PK 1212-004-002PK
0.100" (2.54mm (ID)
0.150" (3.81mm OD)		 Female Luer to Male Luer Lock Natural 24 Hours 10   pack
Pinch tubes adhesive dispensing 1212-004-200PK 1212-004-200PK
0.125" (3.17mm (ID)
0.175" (4.45mm OD)		 Female Luer to Male Luer Lock Natural 24 Hours 10   pack
Pinch tubes adhesive dispensing 1212-004-000PK 1212-004-000PK
0.070" (1.78mm (ID)
0.100" (2.54mm OD)		 Female Luer to Male Luer Lock Natural 24 Hours 10   pack
Pinch tubes adhesive dispensing 1212-004-003PK 1212-004-003PK
0.100" (2.54mm (ID)
0.150" (3.81mm OD)		 Female Luer to Male Luer Lock Natural 24 Hours 10   pack
Pinch tubes adhesive dispensing 1212-004-002BPK 1212-004-002BPK
0.100" (2.54mm (ID)
0.150" (3.81mm OD)		 Female Luer to Male Luer Lock Black 24 Hours 10   pack
Pinch tubes adhesive dispensing 1212-004-100BPK 1212-004-100BPK
0.125" (3.17mm (ID)
0.175" (4.45mm OD)		 Female Luer to Male Luer Lock Black 24 Hours 10   pack
TS1212 Pinch Tube Valve Techcon TS1212
Air Operated Pinch Tube Valve Boxed		 Max. Pressure 60 PSI. With tubes. Natural & Black 24 Hours 1   each
More Info Part Code

Specs

 Colour Lead Time

Pack

 Price GBP Add
TS1201 Pinch Tubes in clear (natural) and black (opaque) colours. Natural for most materials and black for UV cure adhesives. Polyethylene or Polyurethane tubes. Luer lock attachment. Maximum pressure 60 psi. Use with TS1201 manual hand valve only. All prices are for sealed packs of (10).
Pinch tubes adhesive dispensing 1201-000-004PK 1201-000-004PK
0.100" (2.54mm (ID)
0.150" (3.81mm OD)		 Female Luer to Male Luer Lock Natural 24 Hours 10   pack
Pinch tubes adhesive dispensing 1201-000-005PK 1201-000-005PK
0.100" (2.54mm (ID)
0.150" (3.81mm OD)		 Male Luer to Male Luer Lock Natural 24 Hours 10   pack
Pinch tubes adhesive dispensing 1201-000-006PK 1201-000-006PK
0.070" (1.78mm (ID)
0.125" (3.17mm OD)		 Female Luer to Male Luer Lock Natural 24 Hours 10   pack
Pinch tubes adhesive dispensing 1201-000-006PK 1201-006-000PK
0.125" (3.17mm (ID)
0.175" (4.45mm OD)		 Female Luer to Male Luer Lock Natural 24 Hours 10   pack
Pinch tubes adhesive dispensing 1201-000-004BPK 1201-000-004BPK
0.100" (2.54mm (ID)
0.150" (3.81mm OD)		 Female Luer to Male Luer Lock Black 24 Hours 10   pack
TS1201 Hand Lever Pinch Tube Valve Techcon TS1201
Hand Operated Pinch Tube Valve Boxed		 Max. Pressure 60 PSI. With tubes. Black 24 Hours 1   each
More Info Part Code

Specs

 Colour Lead Time

Pack

 Price GBP Add
Fluid Line tubes in clear (natural) and black (opaque) colours. Natural for most materials and black for UV cure adhesives. Polyethylene tubes with luer lock attachment. Maximum pressure 60 psi. Use with dispensing valves, pressure pots, cartridges and syringe barrels. Length options. All prices are for sealed packs of (10).
Fluid line feed tubing adhesive dispensing TSD126-118PK TSD126-118PK
0.100" (2.54mm (ID)
0.150" (3.81mm OD)
18" (457.0mm) Long		 Male Luer Lock to Open End Natural 24 Hours 10   pack
Fluid line feed tubing adhesive dispensing TSD126-124PK TSD126-124PK
0.100" (2.54mm (ID)
0.150" (3.81mm OD)
24" (610.0mm) Long		 Male Luer Lock to Open End Natural 24 Hours 10   pack
Fluid line feed tubing adhesive dispensing TSD126-136PK TSD126-136PK
0.100" (2.54mm (ID)
0.150" (3.81mm OD)
36" (914.0mm) Long		 Male Luer Lock to Open End Natural 24 Hours 10   pack
Fluid line feed tubing adhesive dispensing TSD126-218PK TSD126-218PK
0.100" (2.54mm (ID)
0.150" (3.81mm OD)
18" (457.0mm) Long		 Female Luer Lock to Open End Natural 24 Hours 10   pack
Fluid line feed tubing adhesive dispensing TSD126-224PK TSD126-224PK
0.100" (2.54mm (ID)
0.150" (3.81mm OD)
24" (610.0mm) Long		 Female Luer Lock to Open End Natural 24 Hours 10   pack
Fluid line feed tubing adhesive dispensing TSD226-136PK TSD126-236PK
0.100" (2.54mm (ID)
0.150" (3.81mm OD)
36" (914.0mm) Long		 Female Luer Lock to Open End Natural 24 Hours 10   pack
Fluid line feed tubing adhesive dispensing TSD126-318PK TSD126-318PK
0.100" (2.54mm (ID)
0.150" (3.81mm OD)
18" (457.0mm) Long		 Male Luer Lock to Female Luer Lock Natural 24 Hours 10   pack
Fluid line feed tubing adhesive dispensing TSD126-324PK TSD126-324PK
0.100" (2.54mm (ID)
0.150" (3.81mm OD)
24" (610.0mm) Long		 Male Luer Lock to Female Luer Lock Natural 24 Hours 10   pack
Fluid line feed tubing adhesive dispensing TSD126-336PK TSD126-336PK
0.100" (2.54mm (ID)
0.150" (3.81mm OD)
36" (914.0mm) Long		 Male Luer Lock to Female Luer Lock Natural 24 Hours 10   pack
Fluid line feed tubing adhesive dispensing TSD126-418PK TSD126-418PK
0.100" (2.54mm (ID)
0.150" (3.81mm OD)
18" (457.0mm) Long		 Female Luer to Female Luer Lock Natural 24 Hours 10   pack
Fluid line feed tubing adhesive dispensing TSD126-424PK TSD126-424PK
0.100" (2.54mm (ID)
0.150" (3.81mm OD)
24" (610.0mm) Long		 Male Luer Lock to Female Luer Lock Natural 24 Hours 10   pack
Fluid line feed tubing adhesive dispensing TSD126-436PK TSD126-436PK
0.100" (2.54mm (ID)
0.150" (3.81mm OD)
36" (914.0mm) Long		 Male Luer Lock to Female Luer Lock Natural 24 Hours 10   pack
Fluid line feed tubing adhesive dispensing TSD126-524PK TSD126-524PK
0.100" (2.54mm (ID)
0.150" (3.81mm OD)
24" (610.0mm) Long		 Male Luer Lock to Male Luer Lock Natural 24 Hours 10   pack
Black Fluid Line Luer Lock TSD126-318BPK Techcon TSD126-318BPK
0.100" (2.54mm (ID)
0.150" (3.81mm OD)
18" (457.0mm) Long		 Male Luer Lock to Female Luer Lock Black 24 Hours 10   pack
Black Fluid Line Luer Lock TSD126-324BPK Techcon TSD126-324BPK
0.100" (2.54mm (ID)
0.150" (3.81mm OD)
24" (610.0mm) Long		 Male Luer Lock to Female Luer Lock Black 24 Hours 10   pack
Black Fluid Line Luer Lock TSD126-336BPK Techcon TSD126-336BPK
0.100" (2.54mm (ID)
0.150" (3.81mm OD)
36" (914.0mm) Long		 Male Luer Lock to Female Luer Lock Black 24 Hours 10   pack
Black Fluid Line Luer Lock TSD126-360BPK Techcon TSD126-360BPK
0.100" (2.54mm (ID)
0.150" (3.81mm OD)
60" (1525.0mm) Long		 Male Luer Lock to Female Luer Lock Black 24 Hours 10   pack
     
Delivery: Products shipped by courier on a tracked and insured service for stock items. Products on a longer lead time or built to order will be sent as soon as available. Customers are informed of ship dates.

Typical Applications:- Deposits of UV cure glues, Cyanoacrylate adhesives, solvents, primers, inks, oils, flowable liquids, threadlock adhesives & many others.
  

Dispensing Valves
 
 
 
  Adhesive dispensers     Syringe barrels   Dispensing tips  
  Dispensers & Valve Controllers     Consumables
Syringes		   Dispensing
Tips		  
 
        Copyright © 2008 Adhesive Dispensing Ltd. All rights reserved.  
  Cartridges & Plungers     Dispensing Nozzles   Tip Caps Luer Seals  
 
  Literature
   
  Full Catalogue
  Syringe Barrels
  Cartridges & Nozzles
  Dispense Tips
  Nozzles Brochure
  Dispense Guns
  Dual Air Guns
  Dual Cartridge & Mixers
 

  
 
  Syringe Barrels Syringe Pistons
Syringe Guns Cartridge Guns
Syringe Dispensers Dispensing Equipment
Mini Robots Small Robots
Medium Robots Large Robots
Extra Large Robots Fume Extraction
Bench Stands Syringe Racks
Compressors Cartridge Retainers
Cyanoacrylates Anaerobics
 
  Dispense Tips Tip Caps 
RTV Valves Cyanoacrylate Valves
Anaerobic Valves UV Cure Valves
Grease Valves Solder Paste Valves
Spray Valves Valve Controllers
Pressure Pots Syringe Filling Systems
Filled Barrels Filled Cartridges
Bottles Filled Twin Cartridges
UV Cure Epoxies
 
 
Techcon
 

Copyright 2018 Adhesive Dispensing Ltd. All transactions subject to Adhesive Dispensing Ltd standard Terms & Conditions, E&OE.

Prices are in UK pounds.  Vat is not charged on orders placed outside the EU and any EU orders are exempt from VAT only if a valid company VAT number is provided to us at time of order or before shipping.  Products are covered by a 12-month warranty against faults and malfunction.  All orders online are encrypted for safety and security.  Please read our privacy agreement for details.  We also process phone or fax payments by credit and debit card.  Please contact our accounts department if you would like to open a credit account with us. Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, Adhesive Dispensing Ltd. do not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.
   
 

Website copyright intelligence monitoring